Configuration Tool

TachoSafe Configuration Tool not starting VCRUNTIME140.dll missing
If the TachoSafe Configuration Tool does not start, and you see the following error message: then please download the 32 bit version of Visual C++ Redistri...
Tue, 21 Nov, 2023 at 12:04 AM
D8 Setting
The D8 Tachograph settings only applies to the Tachograph D port 8 pin where some data is sent from the tachograph and we use it to detect the driver card c...
Wed, 28 Mar, 2018 at 10:57 AM
RDU Format file system
To format the file system of an RDU connect it to the computer with an USB cable and open the TachoSafe RDU Configuration Tool: Press the Commands tab P...
Thu, 16 May, 2024 at 3:17 PM
RDU enter bootloader mod
If the device can't be recognized on the USB connector in the Configuration Tool it means probably that it is stuck somewhere in the FW or a FW update w...
Thu, 20 Aug, 2020 at 3:50 PM
RDU FW and bootloader update
If you want to update the Firmware or the Bootloader of a Remote Download Unit you have to download the latest version of the TachoSafe RDU Configuration To...
Fri, 17 May, 2024 at 10:31 AM
RDU Firmware update
Download the latest TachoSafe RDU Configuration Tool. Connect the terminal to the computer with a micro USB cable. Start the Configuration Tool. If th...
Fri, 17 May, 2024 at 10:29 AM
RDU update bootloader
First update the FW version of the unit to the latest version by following this solution: RDU Firmware update If you see in the Message box that Your Bo...
Fri, 17 May, 2024 at 10:38 AM